Friday, March 2, 2012
Dynon GPS 5Hz RECEIVER MODULE for Skyview EFIS System
Do you like this story?
Dynon GPS 5Hz RECEIVER MODULE for Skyview EFIS System Review
Price :Brand: | |
List Price: | |
Our Price: | |
Total Price: In Stock. Usually ships in 1-2 business days |
|
Dynon GPS 5Hz RECEIVER MODULE for Skyview EFIS System Overview
The SV-GPS-250 is a sensitive, WAAS enabled GPS receiver and antenna. The advantage of having the receiver a packaged in one unit with the antenna, is that the output is a standard NMEA serial connection. A shielded antenna cable, with its inherent attenuation of signal and greater difficulty of routing, in not required to connect to the SkyView Display.
GPS latitude/longitude data is necessary for the SkyView to locate its position to display Synthetic Vision and the Moving Map. It is also necessary during calibration of the Remote Compass/Magnetometer, in order for SkyView to determine current location and the correct magnetic inclination.
An SV-GPS-250 is not necessary for the SkyView System, since and NMEA standard GPS input can be utilized from a third party GPS receiver. A major advantage of the SV-GPS-250 is that it derives its power from a SkyView Display Backup Battery. So in the event of loss of ship's power the GPS will continue to be powered. Another advantage is the SV-GPS-250 is designed to be used with SkyView, and no setup is required.
Each SV-GPS-250 contains four leads to attach to the SkyView Main Harness, including RX, TX, 8V, and Ground.
Speakers Outdoor and Indoor Outdoor Power Hand Tools Power Tools Saws
This post was written by: Franklin Manuel
Franklin Manuel is a professional blogger, web designer and front end web developer. Follow him on Twitter
Subscribe to:
Post Comments (Atom)
0 Responses to “Dynon GPS 5Hz RECEIVER MODULE for Skyview EFIS System”
Post a Comment